Laddar sidan
Click to zoom
Fernco·Flap & Penstock Valves
IBECO Linegate
PE knife gate valve for in-line installation. A knife gate valve for installation directly into an existing pipeline, either with a coupling onto the spigot end or onto a flange. The gate moves vertically within a rigid frame and seals against a self-adjusting EPDM strip on all four sides, and is tight in both flow directions, both on and off the seat.
Delivered by
About the product
PE knife gate valve for in-line installation. A knife gate valve for installation directly into an existing pipeline, either with a coupling onto the spigot end or onto a flange. The gate moves vertically within a rigid frame and seals against a self-adjusting EPDM strip on all four sides, and is tight in both flow directions, both on and off the seat. Unlike the wall-mounted gates, both the gate and the frame are made from 316 marine grade stainless steel, giving a higher pressure class: at least 10 mVp. The standard is a non-rising TR20x4 stem with clockwise closing. Operating temperature: Continuous 80 °C Intermittent 100 °C
Benefits
- Installed directly in the pipeline with a coupling or flange
- Tight up to 10 mVp on and off the seat, in both flow directions
- Gate and frame in 316 marine grade stainless steel
- Non-rising TR20x4 stem, clockwise closing
- Estimated service life: 60 years
Variants(10)
Click a row for all details, or + to add it to the quote request.
Material specification
| Component | Material |
|---|---|
| Back plate, guide rails and gate | PE (HDPE PE500) |
| Frame and supporting structure | 1.4401 stainless steel (316 marine grade) |
| Seals | Self-adjusting EPDM seal |
| Threaded nut | polyacetal (POM) |
| Non-rising stem | TR20x4 stem |
Certifieringar & standarder
DIN 19569-4
BS 7775
Document
Tillbehör
Delar, verktyg och kompletteringar som köps till den här produkten.