Laddar sidan
Click to zoom1 / 2
Fucoli-Somepal·Ductile iron parts
Flanged cross
Flanged cross with rotatable flanges in ductile iron – the bolt holes are turned on site in the trench so that they align with the mating flanges in pressurised water mains.
Delivered by
About the product
The flanged cross is a four-way fitting that branches a pressurised water main in two directions from the same point. The range covers sizes from DN 40 up to DN 1000, with equal branches or with a reduced branch so that a smaller branch can be taken off directly without an extra reducer. The cross is cast in ductile iron and withstands 16 bar with flange drilling PN10/16 to the design in EN 545:2006. The flanges are rotatable, which means the bolt holes can be turned on site in the trench so that they align with the mating flanges without the whole fitting having to be turned. In the largest sizes the cross is instead supplied with fixed flanges. Face-to-face dimensions and weight are stated per size, and all fittings can be ordered for PN10, PN16 or PN25.
Benefits
- Rotatable flanges simplify alignment of bolt holes during installation
- Epoxy coating provides good corrosion protection
- Wide size range, DN 40 to DN 1000
- Reduced branch reduces the need for extra reducers
- Withstands working pressures up to 16 bar
Variants(64)
Click a row for all details, or + to add it to the quote request.
Material specification
| Component | Material | Standard |
|---|---|---|
| Body | Ductile iron EN-GJS-500 | DIN EN 1563 |
| Corrosion protection | Epoxy (RAL GZ662) | GSK DIN 30677-2 |
| Flanges | – | DIN EN 1092-2 |
Certifieringar & standarder
DIN EN 1092-2
EN 545